Weblogic, 1 managed server gives HTTP Error 401 Unauthorized, other works fine.

I encountered this weird behaviour last week where one managed server in a cluster of two servers constantly gave the error “HTTP Error 401 Unauthorized“.
The setup was a standard Oracle Service Bus installation on Oracle Weblogic.
The domain consisted out of one Admin server, one cluster with two managed servers.
Managed Server #1 was acting without problems but all the requests which needed authentication and which where pointed to Managed Server #2 failed and responded with a 401 Unauthorized message.
There was an error in the logs of MS#2, which is displayed at the bottom of this post as well.
#### <> <Inbound http BASIC authentication failed
javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User webhosting javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User webhosting denied

The solution to this problem lies in the internal LDAP configuration of the faulty Managed Server. I did not find an answer to what might have caused this problem, but the solution was to rebuild the LDAP setting of the Managed Server.
This is done by following these steps:

  1. Shut down Managed Server via Weblogic Console
  2. Log in via SSH
  3. Rename the following folder: %domain_directory%/servers/%osb_managed_server_1%/data/ldap
  4. Start the Managed Server via Weblogic Console

These steps will rebuild the LDAP folder, which is the internal LDAP to which Weblogic authenticates.
You can then remove the folder you’ve backed up in step 3.
Continue reading “Weblogic, 1 managed server gives HTTP Error 401 Unauthorized, other works fine.”

Dynamic HTTP endpoint in Oracle Service Bus 12c based on values in a database routing table

This article outlines how to set a dynamic endpoint in an OSB HTTP Business Service. The endpoint is retrieved from a routing table which resides in an Oracle 12c database.

Components used for this solution:

  1. Ubuntu Linux 14.04 64bit
    1. JDeveloper, running the Quick Start Oracle Fusion Middleware suite
      1. Oracle Service Bus 12c
      2. Oracle Weblogic 12c
      3. OSB Project location:
        1. https://github.com/visscher/Fusion/tree/master/DBRouting
    2. Oracle Virtualbox Developer Days image for DB 12c, running:
      1. Oracle Database 12c
    3. Oracle SQL Developer 4

This picture shows the running solution in the OSB test console:
Oracle Service Bus Console 12c : Pipeline Testing - DBRouting_v1Pipeline - Google Chrome_019

Database table preparation

We need a routing table in our schema, I’m using this table setup:

CREATE TABLE "C##JORIS"."ROUTINGTABLE"
  (
    "ROUTE" VARCHAR2(50),
    "ENDPOINT" VARCHAR2(100)
  );
Where ROUTE stands for the identifier and ENDPOINT is the HTTP endpoint we try to reach.
I’ve inserted two rows:
Insert into ROUTINGTABLE (ROUTE,ENDPOINT) values ('SalesOrder','http://localhost:7101/salesEndpoint');
Insert into ROUTINGTABLE (ROUTE,ENDPOINT) values ('FinanceReceipt','http://localhost:7101/financeEndpoint');
These two endpoints will point to very simple OSB services which we will create in a moment.
Selection_022

Weblogic configuration: JDBC Data Source

We need to configure a JDBC data source in our Weblogic server, this data source is used by the XQuery function to execute SQL.
Start JDEVeloper, select your integrated Weblogic Server and start it up.
When your domain is started, open the WLS Console:
http://127.0.0.1:7101/console/
Login and open the Data Sources summary:
Selection_020
Navigation in Console: DefaultDomain - Services - Data Sources
Create a new datasource, in my example I use the JNDI name “LocalDB
When you’re done with the configuration, test the datasource to make sure all is well:
Selection_021
The status message will be green and show a check mark if you’ve configured your data source correctly.

JDeveloper: Oracle Service Bus project

If you import the DBRouting project from here, you should have all the necessary services.
I will only discuss the assign steps which are needed in the DBRouting_v1Pipeline.pipeline.
Selection_023
There are three assign actions:
1.) Assign $route: node-name($body/*[1])
This assign determines our routing key. It is the same key as
the first column in the routing table.
The XPath here is used to select the name of the first node
but you can change this to what you want to route on.
2.) Assign $query: 
fn:concat("select ENDPOINT from ROUTINGTABLE where ROUTE = '", $route, "'")
This assign determines the query which will be executed in
the next step. We want to select the ENDPOINT which belongs
to the ROUTE which was assigned in step 1.
3.) Assign $query: 
(fn-bea:execute-sql(
 xs:string("LocalDB"),
 xs:string("ENDPOINT"),
 $query
 )/*:ENDPOINT)[1]
This assign actually executes the SQL query to our database,
which is the first argument.
The second argument names the re-occurring rows, in this
case "ENDPOINT".
The thirst argument is the query to execute.
The XPath after the execute-sql statement is to make sure
we only get one endpoint.
4.) After those assigns, we use place a task “Routing Options” in the HTTP Route node:
We only use the “URI” Routing Option:
$endpoint/text()
Selection_024
This ends the article, if you execute the pipeline you will see the endpoint has become dynamic, it is retreived from the routing table:
Oracle Service Bus Console 12c : Pipeline Testing - DBRouting_v1Pipeline - Google Chrome_019

Oracle SQL Developer 4 does not run on Oracle Java 7 on Ubuntu 14.04

Wow, ain’t this awkward :-). I cannot run Oracle SQL Developer 4 (4.0.2) on Ubuntu with Oracle JDK 7..

To be complete: when running SQL Developer with JDK 7 from Oracle itself, displays the following error;

joris@dipshit:~/programs/sqldeveloper$ ./sqldeveloper.sh
Oracle SQL Developer
Copyright (c) 1997, 2014, Oracle and/or its affiliates. All rights reserved.
LOAD TIME : 968#
# A fatal error has been detected by the Java Runtime Environment:
#
# SIGSEGV (0xb) at pc=0x6aa69be0, pid=9537, tid=1836366656
#
# JRE version: Java(TM) SE Runtime Environment (7.0_65-b17) (build 1.7.0_65-b17)
# Java VM: Java HotSpot(TM) Server VM (24.65-b04 mixed mode linux-x86 )
# Problematic frame:
# C 0x6aa69be0
#
# Failed to write core dump. Core dumps have been disabled. To enable core dumping, try "ulimit -c unlimited" before starting Java again
#
# An error report file with more information is saved as:
# /home/joris/programs/sqldeveloper/sqldeveloper/bin/hs_err_pid9537.log
#
# If you would like to submit a bug report, please visit:
# http://bugreport.sun.com/bugreport/crash.jsp
#
/home/joris/programs/sqldeveloper/sqldeveloper/bin/../../ide/bin/launcher.sh: line 1193: 9537 Aborted (core dumped) ${JAVA} "${APP_VM_OPTS[@]}" ${APP_ENV_VARS} -classpath ${APP_CLASSPATH} ${APP_MAIN_CLASS} "${APP_APP_OPTS[@]}"

Solution: Run Oracle SQL Developer with OpenJDK

First we’ll need to install OpenJDK:

sudo apt-get install openjdk-7-jdk 

Then we’ll need to change the path which SQL Developer uses. This was asked once when you first started it and it is saved in the following path:

~/.sqldeveloper/4.0.0/product.conf

The file [[ product.conf ]] contains the value SetJavaHome, we need to change this to the OpenJDK path;

If you're running 32 bit Ubuntu:

SetJavaHome /usr/lib/jvm/java-7-openjdk-i386

Or if you're running 64 bit Ubuntu:

SetJavaHome /usr/lib/jvm/java-7-openjdk-amd64

After saving this change, you can start SQL Developer on Ubuntu 14.04 and it will use OpenJDK 7, without changing your regular Java settings!

Oracle Service Bus SFTP: BEA-381801 InvalidHostFileException

I have just been working on an OSB SFTP business service, and got this error while testing the service.
While googling, I found out that you need to create a known_hosts file inside your OSB domain. The easiest way of creating a known_hosts file for me, was to use Cygwin and create a ssh (or sftp) connection to the destination.

Steps for the solution:

  • Cygwin: log in to remote system via ssh (or sftp)
  • Copy known_hosts file from ~/.ssh to OSB directory
  • Test business service

Cygwin: login to remote system

Use this command to login to the remote system:

ssh username@hostname

Optionally: Type ‘yes’ when asked if you trust this host
This will create an entry in your known_hosts file in the .ssh folder in your cygwin home directory
This is a (scrambled) contents of the known_hosts file:

joris@jorisworkstation/cygdrive/c/Oracle/Middleware/user_projects/domains/joris_domain/config/osb
$ cat ~/.ssh/known_hosts
10.200.242.65 ssh-rsa <<INSERT A LOT OF GARBLEGARBLE>>

Copy the known_hosts file to OSB

First we need to create the SFTP transports directory in the domain home:
Go to <<domain_home>>/config/osb and create this structure: (Only create the directories in RED)

- <<domain_home>>
- config
- osb
- transports
- sftp

We are now ready to copy the known_hosts file:
In cygwin:

 cp ~/.ssh/known_hosts /cygdrive/c/Oracle/Middleware/user_projects/domains/joris_domain/config/osb/transports/sftp

In Windows: Find known_hosts in your cygwin home folder (in my case: in C:\development\program\cygwin\home\joris.visscher\.ssh\known_hosts) and copy it to the newly created “sftp” folder in your domain home.

Test business service

All steps are now done, we can test the business service!

Additional information:

You will encounter the following error in your logs when this error occurs:
com.sshtools.j2ssh.transport.InvalidHostFileException

####<18-ott-2012 10.57.33 CEST> <Error> <SFTPTransport> <JORISWORKSTATION> <osb_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <cef9dbcf0859648a:31ba6f:13a730795ec:-8000-000000000000014f> <1350550653493> <BEA-381801> <Si ▒ verificato un errore per l'endpoint com.bea.wli.sb.transports.TransportException: com.sshtools.j2ssh.transport.InvalidHostFileException: Il file known_hosts non esiste o non dispone di autorizzazioni di lettura.
 com.bea.wli.sb.transports.TransportException: com.sshtools.j2ssh.transport.InvalidHostFileException: Il file known_hosts non esiste o non dispone di autorizzazioni di lettura.
 at com.bea.wli.sb.transports.sftp.connector.SFTPTransportProvider.sendMessage(SFTPTransportProvider.java:155)
 at com.bea.wli.sb.transports.sftp.connector.SFTPTransportProvider.sendMessageAsync(SFTPTransportProvider.java:110)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
 at $Proxy122.sendMessageAsync(Unknown Source)
 at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
 at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:603)
 at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:538)
 at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:566)
 at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:434)
 at com.bea.wli.sb.test.service.ServiceMessageSender.send0(ServiceMessageSender.java:380)
 at com.bea.wli.sb.test.service.ServiceMessageSender.access$000(ServiceMessageSender.java:79)
 at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:137)
 at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:135)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
 at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
 at com.bea.wli.sb.test.service.ServiceMessageSender.send(ServiceMessageSender.java:140)
 at com.bea.wli.sb.test.service.ServiceProcessor.invoke(ServiceProcessor.java:454)
 at com.bea.wli.sb.test.TestServiceImpl.invoke(TestServiceImpl.java:172)
 at com.bea.wli.sb.test.client.ejb.TestServiceEJBBean.invoke(TestServiceEJBBean.java:167)
 at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl.__WL_invoke(Unknown Source)
 at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
 at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl.invoke(Unknown Source)
 at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_WLSkel.invoke(Unknown Source)
 at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
 at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
 at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
 at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
 at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:252)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
 Caused By: com.sshtools.j2ssh.transport.InvalidHostFileException: Il file known_hosts non esiste o non dispone di autorizzazioni di lettura.
at com.bea.wli.sb.transports.sftp.client.KnownHostVerifier.validateKnownHosts(KnownHostVerifier.java:144)
at com.bea.wli.sb.transports.sftp.client.SFTPClient.authenticate(SFTPClient.java:108)
 at com.bea.wli.sb.transports.sftp.connector.SFTPResource.<init>(SFTPResource.java:78)
 at com.bea.wli.sb.transports.sftp.resource.SFTPUtils.createSFTPResource(SFTPUtils.java:170)
 at com.bea.wli.sb.transports.sftp.resource.SFTPConnectionPool.getResource(SFTPConnectionPool.java:104)
 at com.bea.wli.sb.transports.sftp.connector.SFTPTransportProvider.getSFTPResource(SFTPTransportProvider.java:958)
 at com.bea.wli.sb.transports.sftp.connector.SFTPTransportProvider.sendMessage(SFTPTransportProvider.java:145)
 at com.bea.wli.sb.transports.sftp.connector.SFTPTransportProvider.sendMessageAsync(SFTPTransportProvider.java:110)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
 at $Proxy122.sendMessageAsync(Unknown Source)
 at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
 at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:603)
 at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:538)
 at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:566)
 at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:434)
 at com.bea.wli.sb.test.service.ServiceMessageSender.send0(ServiceMessageSender.java:380)
 at com.bea.wli.sb.test.service.ServiceMessageSender.access$000(ServiceMessageSender.java:79)
 at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:137)
 at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:135)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
 at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
 at com.bea.wli.sb.test.service.ServiceMessageSender.send(ServiceMessageSender.java:140)
 at com.bea.wli.sb.test.service.ServiceProcessor.invoke(ServiceProcessor.java:454)
 at com.bea.wli.sb.test.TestServiceImpl.invoke(TestServiceImpl.java:172)
 at com.bea.wli.sb.test.client.ejb.TestServiceEJBBean.invoke(TestServiceEJBBean.java:167)
 at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl.__WL_invoke(Unknown Source)
 at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
 at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl.invoke(Unknown Source)
 at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_WLSkel.invoke(Unknown Source)
 at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
 at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
 at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
 at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
 at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:252)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

Create sample XML message from XSD in Eclipse (Free solution!)

On an Oracle Service Bus project you are often supplied with XSD’s or WSDL’s when you’re integrating with clients. The customer or client expects you to test their web service but before you do, you might want to take a look at the XML which should be sent to make sure you’re sending compliant XML.
One way to do this is by importing the WSDL in SoapUI and creating sample test requests, this comes in quite handy when you are actually using a WSDL, but what if the customer only supplies an XSD? SoapUI does not support creating sample XML from an XSD element.
There are several commercial products which can solve this problem but if you’re only looking for generating sample XML messages from XSD, you might want to look at using Eclipse’s built in XML generating option:
First step is to import the XSD in your project, the right click the Schema and select “Generate” and then “XML”

Screenshot - Eclipse - Generate XML from XSD
Screenshot – Eclipse – Generate XML from XSD

You will be presented with a “New XML file” dialogue which lets you save your new XML sample. Choose any location you want, and click “Next”. Then you will be presented with the options for your new XML sample. Select the options you desire and press “Finish”
Screenshot - Generate XML - New file dialogue
Screenshot – Generate XML – New file dialogue

Your new XML file has been generated and ofcourse is compliant with your XSD right now!

How to start with Oracle Service Bus (OSB) development

This post is meant to explain the few steps you need to take to start with Oracle Service Bus (OSB) development on a Windows 7 laptop. The OSB version used is 11g, although these steps are also suitable for OSB 10gR3 and Aqualogic Service Bus (ALSB) as well.
There are as many ways of organizing a project as there are people, this is the way I have chosen and this by no means is meant as “the way to go“. It is merely meant as a guideline, (so please do adapt where you find it more suitable for your needs)
(You can find the installation instructions for an OSB 11g development environment in this blog post)
There are two OSB projects which you can create when you open the Oracle Enterprise Pack for Eclipse (OEPE):

  • Oracle Service Bus Project
  • Oracle Service Bus Configuration Project

An OSB Project contains the actual project which you will create. These are often functionally bound and represent a hierarchical structure similar to the structure on your hard disk.
An OSB Configuration Project represents one domain on which you will deploy your projects. These Configuration Projects contain common settings (like a pointer to an SMTP server)

Create an OSB Configuration Project

The first step in a every new OSB Workspace is to create a new configuration project. Later on when you create OSB projects you need to choose the Configuration Project to which they will belong.
Side note: OSB Configuration Projects can be used as pointers to a OSB Domain (or a local domain)
Within Eclipse, right click the empty space in the Project Explorer and choose “New” and then “Oracle Service Bus Configuration Project”. For now we will not use the advanced functions so name your Configuration project to a name suitable for you (for me that mostly means “OSB Configuration”) and press “Finish”
In a new Workspace you will get the question if you would like to switch to the “Oracle Service Bus perspective”, choose “Yes”.
The above steps are the same for every project. I keep my workspaces aligned with the domains to which I deploy.
This means a new workspace for each domain, I often work with common schema’s and services (e.g. loggers / mailers) which I place in a separate project. Although I do re-use a lot of services, I found it better to keep this lean and not to tightly coupled so I create a new Common Services project for each domain instead of creating ONE Project to rule them all.

Create an OSB Project

This paragraph will focus on creating an OSB Project and will contain a sample service.
Right click the empty space in the “Project Explorer” and choose “New” and then “Oracle Service Bus Project”
For the start of every new project you will create the following structure:

  • Project name (In this case “OSB Sample Project”)
    • Business Service
    • Proxy Service
    • Schema
    • Transformation
    • WSDL

This leads to this view:

Screenshot - OSB Eclipse - Project Explorer Sample Project
Screenshot – OSB Eclipse – Project Explorer Sample Project

This is the basis you need for creating Oracle Service Bus services. I will expand in further detail in later posts.

Create a local development OSB domain

If you do not have a development environment available or prefer to test your service locally you can also create a OSB domain on your local machine. The next paragraph leads you through the creation of a new OSB domain via Eclipse.
We will use the “Configuration Wizard” which will let us create a fresh new local Weblogic domain on our computer.
Press “Start” / the Windows button and enter “Configuration Wizard” which will show the start menu entry in the OSB menu folder:

Screenshot - Start Menu - Weblogic Configuration Wizard
Screenshot – Start Menu – Weblogic Configuration Wizard

If all went well, you will be presented with this choice:
Choose “Create a new Weblogic domain” and click “Next” to continue to the product selection:
Screenshot - Weblogic Configuration Wizard - Product Selection
Only select “Oracle Service Bus for developers – 11.1.1.6 [Oracle_OSB1]”, this will automatically select the dependencies as well. Click “Next” to continue to the Domain name and location screen:
Screenshot - Weblogic Configuration Wizard - Domain Name and Location
Tip: I tend to use a domain name which indicates that I am working on my own machine as well as states the product and version which is deployed on the Weblogic server. The domain name is quite visible in the web console and this way I’m sure I’m working on the correct domain.
Enter the domain name you wish and press “Next” to continue to the admin user name and password screens:
Screenshot - Weblogic Configuration Wizard - Admin user name and password
Since 11g the password is bound to rules which prohibit you from choosing a really simple password. So with this added difficulty make sure you pick one which you will remember!
When you’re done, click “Next” on every screen until you get to the configuration summary.
Screenshot - Weblogic Configuration Wizard - Configuration Summary
The configuration is done when you select “Create”, your domain will then be created, after which you will be presented with this summary:
Screenshot - Weblogic Configuration Wizard - Finished
Click “Done” to exit the configuration wizard. We will not start the Admin server yet.
We can now continue to configuring Eclipse to use this domain.

Add our local OSB domain to Eclipse

This paragraph explains how to configure an OSB domain in Eclipse. It is possible to configure a remote (DEV) domain here which is running on another server. I would advise to only configure local domains within your Eclipse, a DEV environment is often shared among colleagues and you might overwrite or tamper with your fellow colleague his or her services without knowing it.
As a guideline: Use the DEV environment to test project exports and see if those are working without problems.
Start Eclipse and choose your workspace.
First activate the “Servers” tab in the bottom window, as shown in the screenshot below:
Screenshot - OSB Eclipse - Servers tab
Then right click the empty space in the window and select “New” and then “Server”.
Just to make sure you don’t encounter strange behavior when you deploy to production, you should always choose and use the same version for development and deployment. In this example we choose “Oracle WebLogic Server 11gR1 (10.3.6)”:
Screenshot - OSB Eclipse - New local domain
Again: Although it is not necessary, I do like to rename the domain name (Server’s host name) to a value which will show me that I’m working local and on which version.
In the following examples we will also log into the Application server Weblogic via the web console. This Weblogic domain is also named “local_osb_11g” which again helps you to identify the domain when you’re shifting between local / DTAP environments.
For your consideration: Depending on your needs you can later on create several local domains. If you are working on two projects at the same time it makes sense to create two domains.
Most of the time I re-use one domain since you can redeploy all projects in your workspace within a minute. This way you are also absolutely sure that your local configuration is always the way you expect it to be.
In general: Most clients will use one configuration profile for all OSB domains.
After pressing “Next” you will be presented with the Domain Directory selection dialogue, where you will need to adjust three settings:

  1. Choose “Local” as “Server type”
  2. Choose your newly created domain via the dropdown and “Known Domains”
  3. Select “Always start Weblogic server in debug mode” to ease debugging later on

Screenshot - Eclipse Domain configuration - Directory Configuration
Press “Next” to select the resources which we will deploy on our local domain.
Screenshot - Eclipse Domain Configuration - Add resources
Add the Configuration Project you wish and click “Next” in the next three screens. Click “Finish” in the last screen to finalize your domain configuration:
Screenshot - Eclipse Domain Configuration - Finalize the config
If you are successful you should have a bottom window looking like this:
Screenshot - OSB Eclipse - Local OSB Domain
We are now ready to start this local server and deploy our newly created Projects.
Right click the top line (which stands for the domain) and select “Start”.
Side note: You can also start the domain via the start menu or straight through the command shell by using “startWeblogic.cmd”. In my installation, it is located at: C:\Oracle\middleware\osb11g\user_projects\domains\local_osb_11g\bin
The tab “Console” will activate and will show the details of the server starting. It will take a minute or two but when the local domain is started you will see the following line:

<10-jul-2012 1:20:47 uur CEST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>

Open a internet browser and go to the following URI to open the OSB web console to access your synchronized brand new OSB domain:
http://localhost:7001/sbconsole
After logging in with the user “weblogic” and the password you’ve chosen, it should look like this:
Screenshot - Chrome running SBConsole
You can see the OSB projects you’ve deployed to this server via the button “Project Explorer”.
Note: You can also develop new services via this SBConsole, most functions which are available via Eclipse also exist in the SBConsole.
That’s it! You are now fully equipped with a running OSB domain on your machine and can start developing and running your own web services.

Oracle Service Bus 11gR1 IDE Eclipse OEPE installation on Windows 7

Follow these steps to setup a development environment for Oracle Service Bus 11gR1 (11.1.1.6 is used in this example)
Download these components:

  • Oracle WebLogic Server 11gR1 (10.3.6) and Coherence and OEPE for Windows (32-bit) (Part Number: V24367-01)
  • Oracle Service Bus 11g (11.1.1.6.0) (Part Number: V29756-01)
I could not find these files through the Oracle.com website but you can download previous versions through the Oracle Software Delivery Cloud. These two installation files can be found in this category:
Product Pack: Oracle Fusion Middleware
Platform: Microsoft Windows (32bit)
Choose media pack: Oracle Fusion Middleware 11g Media Pack for Microsoft Windows (32-bit) 11.1.1.6.0 (Part number: B55383-41)

(Tip: Search for the Part numbers to make sure you download the correct versions)
First, install WebLogic Server with Oracle WebLogic Server 11gR1 + Coherence + OEPE and then install Oracle Service Bus.
When you install OSB, be sure to select the OEPE that is located inside the middleware directory.
After both installations, in the directory “Middleware directory/oepe_11gR1PS2” is eclipse.exe. If you execute this file, you can open Eclipse and start with creating an osb project.
Side note;
Some people can’t see the OSB perspective in Eclipse after this installation. Apparently it’s a rights issue which can be solved by navigating to the Oracle_OSB directory via Windows Explorer. You will be asked for permission to access that directory and after that dialogue you will be able to open the OSB perspective within Eclipse.